To make a sofa bed more comfortable, fix the mattress first, then the bedding, then the frame. Add a topper for cushioning, level out sagging with firm cushions or a bed board, and dress the bed in breathable sheets. Most of these fixes take minutes, and together they give your guests a comfortable sofa bed.
Key Takeaways
- Adding a topper, levelling out sagging and switching to breathable bedding are the quickest ways to make a sofa bed more comfortable.
- Regular frame checks and simple care habits, like rotating cushions and airing the mattress, keep it comfortable through years of guest stays.
- Upgrade once sagging, creaks or morning aches keep coming back, ideally to a sofa bed with a real mattress built in.
Shopping for a new one instead? Our guide on how to choose a sofa bed covers sizes, mechanisms and mattress types. This post covers the fixes for the sofa bed you already own.

Why Some Sofa Beds Feel Uncomfortable
Most sofa beds feel uncomfortable because of a thin mattress, an uneven sleeping surface, a tired frame or the wrong bedding. It all traces back to one compromise. Your sofa bed folds into a couch every morning, so the mattress stays slim and the frame gets extra moving parts.
Here’s how each one shows up overnight.
- Thin mattresses squash flat under your hips and shoulders, so you feel the bars and slats underneath. That’s why a good mattress in a sofa bed matters as much as the frame.
- Uneven surfaces leave a ridge where the cushions or mattress sections meet, and older seats sink in the middle.
- Tired frames creak once bolts work loose or slats slip out of place.
- The wrong bedding, like polyester sheets and flat pillows, traps heat and strains your neck.
Add a Mattress Topper
Lay a mattress topper over your sofa bed to cushion a thin mattress and soften the bars underneath. Toppers are the quickest single upgrade, and you can roll one away when the sofa folds back up.
Match the topper to the problem. Go firmer if the mattress feels soft and sinks a little, and go plush if it feels hard. Deeper sagging needs the board fix in the next section. Pick 2 to 4 cm for the odd guest and 5 to 8 cm for regular use.
Our Firm and Plush toppers are 5 cm deep, and the Ultra Plush is 8 cm. Look for corner straps or a grippy base so it stays put through the night.
We make toppers for soft, hard and hot sofa beds.
Our guide to the best mattress topper for a sofa bed compares each one in more detail. For last-minute guests, fold a thick quilt under the fitted sheet as a stand-in.
Level Out Gaps and Sagging
Fill the gaps with firm padding, then slide a board under any section that sags. Both fixes cost very little and take minutes.
On sofa beds where you sleep on the seat cushions, start with the seam where the backrest meets the seat. Tuck a firm cushion, a rolled towel or a strip of foam into the dip. Then lay your topper over the top so the whole surface feels flat and even.
Sagging needs support from underneath. Cut a sheet of thin plywood to fit under the mattress, or use a ready-made bed board, and the sinking middle firms up straight away. Lift it out before you fold the sofa away.
Upgrade the Bedding and Pillows
Swap in breathable sheets, a quilt that suits the season and a pillow with proper neck support. Bedding sits right against your skin, so it shapes how warm and smooth the whole bed feels.
Choose breathable sheets in bamboo or linen, since they let heat escape instead of trapping it against the foam. Pull the fitted sheet tight as well. Loose fabric bunches into creases you’ll feel under your back.
These sheets and quilts cover hot summers and chilly winters.
Pillows deserve the same attention. Guests sleep in all sorts of positions, so an adjustable-height pillow lets each one set their own loft. Side sleepers can also slip a knee pillow between their legs to ease pressure on the lower back.
Four pillows from our range suit a sofa bed setup.

Check the Frame
Checking the frame means tightening loose bolts, reseating slipped slats and opening the mechanism slowly so every part moves smoothly. Ten minutes with a screwdriver sorts out most creaks.
Each type of sofa bed has its own weak spots.
| Sofa Bed Type or Frame | Where It Wears | Quick Fix |
| Fold out | Hinges, which take most of the strain | Open the bed fully so the mattress lies flat, and clear bedding from the hinges before folding it back |
| Pull out | Sliding base and feet | Make sure the pulled-out section sits level with the seat, and add felt pads under the feet on hard floors |
| Modular | Seams between sections | Push the pieces together firmly so the seams line up into one even surface |
| Timber frames | Joints, as timber swells and shrinks with the seasons | Re-tighten every few months, and keep the sofa away from heaters and direct sun |
You’ll find every mechanism explained in our guide to the types of sofa beds.
Set Up the Room for Sleep
Keep the room cool, dark and quiet, and put a few bedside basics within reach. Sofa beds often live in living rooms and studies, so they pick up more light, noise and draughts than a bedroom does.
Position the bed away from draughty doors and windows that let in streetlight. On warm nights, crack a window or run a fan, which doubles as white noise. Draw the curtains early so the room cools down, and offer an eye mask if morning sun creeps in.
Little touches make guests feel at home. Leave a lamp, a glass of water and a phone charger beside the bed, and fold a spare blanket at the foot for cooler nights.
5 Tips to Keep Your Sofa Bed Comfortable
Small habits like rotating cushions, using a protector and airing the mattress keep your sofa bed comfortable between guest stays. Build these five into your routine.
- Rotate the seat cushions every few weeks if they come off. Spreading the wear stops the same spots from sinking first.
- Cover the mattress with a waterproof mattress protector. Spills and sweat stay out of the foam, which keeps it fresh for longer.
- Vacuum the crevices once a month, especially where the seat meets the backrest. Spot clean any spills with mild soap and a damp cloth, then let the fabric dry fully before folding.
- Air it out between guests. Strip the bedding and leave the bed open for a few hours so trapped moisture can escape.
- Sit back in the seat. Perching on the front edge every day squashes that strip of foam faster than the rest.

Signs It’s Time to Upgrade
Persistent sagging, creaks and morning aches are the clearest signs it’s time to upgrade. They usually mean the mattress or frame has worn past what a topper or screwdriver can fix.
Watch for a few other signs as well.
- Cracked slats or torn fabric that keep breaking after repairs.
- Sticking mechanisms that jam or grind each time you open the bed.
- Nightly sleeping on a sofa bed designed for the odd guest.
Ecosa’s fold out and pull out sofa beds have a built-in hybrid or high-density foam mattress, so guests sleep on a real mattress.
Every Ecosa sofa bed also comes with a 100-night trial and a 5-year limited warranty. Anyone sleeping on theirs most nights should read our guide to sleeping on a sofa bed every night.
Sleep Better on an Ecosa Sofa Bed
Shop our fold out, pull out and modular sofa beds when your current one is past saving. All of them are built for sitting and sleeping, so the spare room couch works as a comfortable sofa bed from day one.
Happy with the one you’ve got? Pair it with one of our mattress toppers and the fixes in this guide to make a sofa bed more comfortable tonight. Either way, explore our full sofa bed range to find the size and style that suits your space.