Product Guides

How High Should Your Bed Frame Be?

November 16, 2026   By Andy Jacinto
hd

How high should your bed frame be? High enough to lift your mattress top to roughly knee height, which is 50 to 63 cm from the floor for most adults. That way you can perch on the edge with both feet flat on the floor.

Key Takeaways
  • How high your bed frame should be comes down to knee height, so aim for 50 to 63 cm from floor to mattress top for most adults.
  • Getting the height right takes strain off your knees and hips every time you sit, stand or climb in.
  • Find your number by adding slat height to mattress depth, then factor in age, mobility, your partner and your room.
  • Our Haven Bed Frame with the 25 cm Ecosa Mattress sits at about 58 cm, right in the standard range.

This guide covers standard heights, how to measure and choose yours, when to go taller or lower, and four quick FAQs. Our guide on how to choose a bed frame guide covers the bigger decisions, from materials to sizes and styles.

What’s a Standard Bed Frame Height?

Aim for a bed frame height that brings your mattress top to 50 to 63 cm, the standard bed height for most adults. Frames on their own usually measure 15 to 40 cm from the floor to the slats. Low platforms sit at the bottom of that range, while storage bases sit near the top.

Subtract your mattress depth, typically 22 to 40 cm across our range, to find the frame you need. Our Haven Bed Frame with the 25 cm Ecosa Mattress lands at around 58 cm, right in range. That height works as the default because it lines up with average knee level. Standing up takes a quick push through your heels instead of a climb or a crouch.

Prefer a lower, more grounded look? Our Cape and Rise Bed Frames sit closer to the floor, landing at about 41 to 43 cm with the same mattress. Both suit a calm, minimalist bedroom.

woman-sitting-on-ecosa-cape-marri-timber-bed-frame-touching-headboard

Why Your Bed’s Height Matters

Bed height decides how easily you get in and out of bed, how much fits underneath, and how big your room feels.

Getting In and Out of Bed

Knee-level height lets you sit, plant your feet and stand up with ease. Sleep too low, and every morning starts with a squat. Go too high, and climbing in turns into a small hop. Both put extra strain on your knees and hips, which matters even more with joint pain or a recent injury. If you’re recovering from an injury, check with your physio or GP.

Room for Storage

Taller frames leave space for drawers and storage tubs underneath. Built-in drawers, like the four on our Alta Storage Bed Frame, turn that gap into extra linen storage. Each Alta drawer is 61.6 cm wide and 13 cm high, enough for a pillow plus a folded sheet set. Lower frames trade the space for a sleeker profile.

How Your Room Looks

Visually, a low bed makes a small room feel larger, while a tall bed fills out a room with high ceilings. Lower frames suit a modern, minimalist look, and taller ones lean more traditional. Frame material sets the mood too, with timber bed frames bringing natural warmth and upholstered styles like our Nuve Cloud adding a soft, cosy feel.

woman-making-bed-on-ecosa-nuve-cloud-upholstered-bed-frame

How to Measure From Floor to Mattress Top

Hold a tape measure upright beside your bed and read it level with the top of the mattress. For a new frame, add its floor-to-slat height to your mattress depth instead.

These four steps walk you through both. 

Step 1: Measure Your Current Bed

Run a tape measure straight up from the floor to the top of your mattress, close to the edge of the bed. Keep the tape vertical and read it at eye level for an accurate number.

Step 2: Find the Slat Height on New Frames

Check the floor-to-slat figure in the product measurements, since slats are where your mattress actually rests. Retailers usually list it under dimensions, sometimes as base height or slat height. Keep it separate from under-bed clearance, which is the gap beneath the frame rails and usually sits a few centimetres lower.

Step 3: Add Your Mattress Depth

Put your mattress depth on top of the slat figure, and you know your total bed height before you buy. Our mattress thickness guide lists the depths of our main mattresses for quick maths.

Step 4: Include Any Topper

Toppers add plush comfort and lift the sleeping surface, so include their depth in your total. Our 8 cm Ultra Plush Mattress Topper lifts a Cape Bed Frame and Ecosa Mattress from 43 cm to a standard 51 cm.

woman-placing-glass-on-ecosa-rise-timber-bed-frame-headboard-shelf

Choosing the Right Height for You

With your tape measure handy, pick a height that suits your legs, your mobility, your partner, your mattress and your room.

Buying for an ageing parent or a little one? The five checks below work for them too. 

Start With Your Knees

Sit on the edge of your bed with your feet flat on the floor. Your knees should bend close to 90 degrees, with your hips roughly level with your knees. Hips that drop below your knees mean the bed sits too low, while dangling feet point to one that’s too high.

Factor In Age and Mobility

Older sleepers and anyone with sore hips or knees usually find 51 to 58 cm easiest, since standing up takes less effort. Young kids suit a lower bed of 40 to 50 cm, and our guide to the best bed height covers both in more detail.

Plan for Two Sleepers

Choose the height that suits whichever partner finds getting in and out harder, usually the one with joint pain or less mobility. The other partner will adapt to a few centimetres either way far more easily than sore knees will.

Account for Mattress Depth

Mattress choice alone can shift your bed by 18 cm across our range, from the 22 cm Essence to the 40 cm AeroLux. Pillow tops add the most lift, so the AeroLux Mattress pairs well with a lower frame like the Cape or Rise.

Match the Room and Ceiling

Low ceilings suit a lower bed, while high ceilings can carry a taller frame and still feel open. Keep your mattress top within about 10 cm of your bedside table so your lamp, phone and water glass stay in easy reach.

minimalist-bedroom-with-ecosa-axis-timber-bed-frame-and-sage-bedding

High vs Low Beds and Who They Suit

Lean taller for storage and a classic look, or lower for small rooms, kids and pets. Here’s how the three height ranges compare.

Bed heightTotal heightBest for
Low40 to 50 cmSmall rooms, sloped ceilings, kids and pets
Standard50 to 63 cmMost adults and easy in-and-out
High63 to 76 cmTall sleepers, storage and traditional rooms

Want the full pros and cons? Our guide to high and low bed bases digs deeper. Ready to compare? Browse our bed frames by height and style.

When Should You Choose a Tall Bed Frame?

Choose a high bed frame that puts your mattress at 63 to 76 cm in these situations.

  • Tall sleepers sit and stand more naturally from a higher bed.
  • Extra storage fits underneath, from drawers to tubs of spare linen.
  • Traditional bedrooms suit the grand, lifted look of a tall bed frame.
  • Vacuuming gets easier with a bed frame high off the ground.

Already own a low bed? Try these 11 ways to make your bed higher.

When Should You Choose a Low Bed Frame?

Sleeping closer to the floor, at 40 to 50 cm, works best in these situations.

  • Small rooms feel bigger when the bed takes up less visual height.
  • Sloped ceilings and attic bedrooms suit a lower profile.
  • Minimalist rooms look calmer with a low bed frame anchoring the space.
  • Kids and pets can climb in and out safely on their own.

Read the Complete Bed Frame Buying Guide

Materials, sizes and styles all shape your ideal frame, and our complete bed frame buying guide covers each one. 

Next time a friend asks how high a bed frame should be, you’ll know it starts at your knees. Match your bed frame height to your mattress, your body and your room. Then browse our bed frames, from low timber styles like the Cape to storage styles like the Alta, and pair one with our mattresses for a bed that sits just right.

FAQs

","default_expanded":true},{"question":"How Do You Lower a Bed That Sits Too High?","answer":"Swap to a slimmer mattress or a lower frame, since those two parts set most of your height. Moving from the 40 cm AeroLux to the 25 cm Ecosa Mattress drops your bed by 15 cm. Removing a topper helps too, and taking off our 8 cm Ultra Plush Mattress Topper lowers your bed by 8 cm.","default_expanded":true}]}' />
WRITTEN BY

Andy Jacinto

SEO Content Writer
Andy writes about all things sleep at Ecosa, blending research with storytelling to make rest a little easier for everyone. She turns big sleep questions into relatable reads, so readers can trust the advice and enjoy the scroll. Off the clock, you’ll catch her playing detective with her latest true crime docu obsession.

Up Next
Pros and Cons of a Leather Sofa Bed
November 12, 2026   By Andy Jacinto